2013 Ford Escape. Using the EVO-FORT1 with THarness. Have the flashlink updater. Unit is updated to 71.34. I have the THarness wired to the 4 wires from the 20 pin. The locks work. I did have a hard time getting it programmed to the car. I used the 2 key method. It was always the second key would not register the bypass. But it is programmed now. I hit the 3xlock, the red light turns on solid, then the yellow light comes on solid and the iginition powers up. after about 5-6 secs. both lights go out, and the iginition powers down. Then it retrys. solid red light, then solid yellow light, iginition powers up, after 5-6 sec, the red light flashes 3 times, then everything powers down.
The 2 CAN-BUS wires are connected. When it attempts to starts, the are 7.3v at the yellow/black wire that is connected to 20pin yellow wire (A1) and Purple/Yellow (16).
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
