Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

2012 Volkswagen Jetta Sportwagon TDI Remote Start Option(s)

Looking to see if there is a system I can order for my 2012 Jetta Sportwagon TDI. This is a standard key vehicle. I think countries other than the US called this vehicle a Golf Sportwagon, but I could be mistaken.

1

vw xiesel support

Will EVO-ALL support glow plug dead for 2015 vw passat diesel

0

2013 Touareg no crank 3x lock Thar-AUD1/Evo all

2013 Touareg 3.0 TDI, unit programs fine however when 3x lock the vehicle dash lights up but no crank. I triple checked PIN2 of the BCM connector for the brake lights as directly across in PIN18 is the same color wire, also with a test light at the module it lights up with ign on and pressing the brake pedal. I assume its an option in the module that needs changing. Module S/N is 001A07217040 Thanks

0

2014 Passat 2.0 Tdi Diesel Reg Key +evo all

Hi 2014 Passat 2.0 Diesel Regular Key +evo all - when the remote start turns on the ignition is it going to wait for the glowplugs to turn off or it wll crank right away without preheating or how long will it wait before cranking??

0

2013 Touareg no crank 3x lock Thar-AUD1/Evo all

2013 Touareg 3.0 TDI, unit programs fine however when 3x lock the vehicle dash lights up but no crank. I triple checked PIN2 of the BCM connector for the brake lights as directly across in PIN18 is the same color wire, also with a test light at the module it lights up with ign on and pressing the brake pedal. I assume its an option in the module that needs changing. Module S/N is 001A07217040 Thanks

0

2013 Touareg no crank 3x lock Thar-AUD1/Evo all

2013 Touareg 3.0 TDI, unit programs fine however when 3x lock the vehicle dash lights up but no crank. I triple checked PIN2 of the BCM connector for the brake lights as directly across in PIN18 is the same color wire, also with a test light at the module it lights up with ign on and pressing the brake pedal. I assume its an option in the module that needs changing. Module S/N is 001A07217040 Thanks

0

2013 vw touareg no start except with brake pedal

sn: 002b04174651 version 60.11 first install was with thar-aud1 that didnt work ignition didnt come on and it was asking to remove key from ignition second install was wire to wire installation worked fine could program the key ect. tried remote start ignition comes on but no start at first ign on if i touch the brake it would stall soon after at second ign on (on same remote start attempt) it keeps running. verified yellow/red wire to black/red wire all seems ok. i got 12v at black/red if i touch the brake. at one time while trying car start even if yellow/red was connected. car is a diesel if that matters.

0

2013 vw touareg no start except with brake pedal

sn: 002b04174651 version 60.11 first install was with thar-aud1 that didnt work ignition didnt come on and it was asking to remove key from ignition second install was wire to wire installation worked fine could program the key ect. tried remote start ignition comes on but no start at first ign on if i touch the brake it would stall soon after at second ign on (on same remote start attempt) it keeps running. verified yellow/red wire to black/red wire all seems ok. i got 12v at black/red if i touch the brake. at one time while trying car start even if yellow/red was connected. car is a diesel if that matters.

0

2013 vw touareg no start except with brake pedal

sn: 002b04174651 version 60.11 first install was with thar-aud1 that didnt work ignition didnt come on and it was asking to remove key from ignition second install was wire to wire installation worked fine could program the key ect. tried remote start ignition comes on but no start at first ign on if i touch the brake it would stall soon after at second ign on (on same remote start attempt) it keeps running. verified yellow/red wire to black/red wire all seems ok. i got 12v at black/red if i touch the brake. at one time while trying car start even if yellow/red was connected. car is a diesel if that matters.

0

Remote starter for 2014 vw passat TDI (diesel)

0

will the evo one on a 2012 vw tdi wait to start until the glow plugs have heated up when remote starting?

just bought a evo one for my 2012 vw tdi. will it wait to start after the glow plugs have heated up when using the remote start? or is this not recommened for diesels? I havent installed it yet or plugged the programmer into my computer so see what all the evo one can do.

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue