2020 Toyota Tacoma Auto, No factory alarm, H Key.
Evo-One
No RF kits
Viper VSM550 Cellular
Tried following the guides, remote start works fine, but the vsm550 did not have a green light and would not communcate with the evo-one.
May have used the wrong remote start side firmware at first, i used the "recommended firmware" that flashlink told me. I think 1.25
Used the latest Bypass firmware flashlink recommended, cant remember at the moment what it was.
Installed the unit with the t harnesses, made the tmps cut etc, all seemed to work as it should, realized the cell was not working, so i pulled the unit to bring inside and was going to drop it down to 0.83 which i did.
However when i went to check the options for the rf kit, xl202 option was missing but checked, it show N/A along with several other options that way.
Tried to flash to a different firmware and back, even tried uninstalling flash link and reinstall, didnt work.
decided to flash it to my honda pilot and then go back to my tacoma but apparently at this point i am told i can no longer flash the unit.
That being said, i can now see the option for xl202 again, note the option was there when i first flashed it all and took to the truck, it was only gone when i tried to drop down to .83
My main question now is:
1. can someone please unlock my unit so i can flash it back to my truck. - 002B04 008976
2. what is the correct combination of firmwares / latest firmwares for my setup, bypass side and remote start side.
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
