I installed a remote start , evo-all and the int-bmw-2 in my wife's 2009 Mini Cooper. Evo -all seams to have programmed. However the int-bmw-2 would not let the vehicle start for about the 1st 5 minutes after installed. Once it was started with the key in the slot and the button pushed, it would not turn off. I could remove the key from the slot and it would still run. I finally had to disconnect the int-bmw-2 ribbon cables and hook the ignition up direct to turn the car back off. Anyone have any ideas or could I have a bad int-bmw-2.