Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

1

Doesn't crank on first or second try, but then does next attempt

Installed EVO ALL on my 2006 Chrysler 300. It will crank on the first attempt, start and then stop; then does the same on the second start. After this cycle when reengaged it will start on the first attempt. Why does it not start the vehicle on either of the two first attempts of the first try, but then does start on the next attempt?

0

Ingition comes on, but engine does not crank

Hi, I have a 2005 Chrysler 300 C and have fitted an Evo-All in stand alone mode. All programming seems to have worked ok (atleast the unit responded as per the documentation. And i have enabled the stater option ( i have checked a couple of times on the unit). When i click the key remote 3 times, the doors lock-unlock-lock, the ignition and lights turn on. but the engine does not crank. The units lights go from blue, and then end up at red. I assume the immobiliser is kicking in to prevent the car starting ? do you have any suggestions? The car still starts fine with a key. Thanks

0

Ingition comes on, but engine does not crank

Hi, I have a 2005 Chrysler 300 C and have fitted an Evo-All in stand alone mode. All programming seems to have worked ok (atleast the unit responded as per the documentation. And i have enabled the stater option ( i have checked a couple of times on the unit). When i click the key remote 3 times, the doors lock-unlock-lock, the ignition and lights turn on. but the engine does not crank. The units lights go from blue, and then end up at red. I assume the immobiliser is kicking in to prevent the car starting ? do you have any suggestions? The car still starts fine with a key. Thanks

03/03/2015

Chrysler Jim (850Pts.)

1

EVO-CHRT5 in 2005 Chrysler 300 starts after one lock vs 3x lock.

When the unit was first installed, everything seem to be operating as designed. 3x lock and the car starts. No over past week or so, that car starts with one lock. So when the car is exited and the the lock button is pressed, the car locks and then remote starts.

1

2005 chrysler 300 evo-all stand alone cranks too long service 001A06 316072

car starts good but starter cranks for 5 secsonds after car is running

1

for chrysler

hello! which wires you need to connect to Fortin made ??with autostart key for Chrysler 300 from 2005?

for fortin 5?

what color wire?

no alarm, just Fortin!

1

for Chrysler 300 from 2005

hello! which wires you need to connect to Fortin made ??with autostart key for Chrysler 300 from 2005?

for fortin 5?

what color wire?

 

1

for chrysler

hello! which wires you need to connect to Fortin made ??with autostart key for Chrysler 300 from 2005?

for fortin 5?

what color wire?

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue