Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

Does LTE module control turning heater/AC on/off, heated seats on/off, temperature control? 2010 Audi A4 Key-Port

I just installed the AUDT harness and Evo All module for remote start into my 2010 Audi A4 with key-port. I want to add LTE. Do I just purchase the Fortin Evo start module and program and connect it to my existing EVO All with T-harness? In addition to App control of remote start, GPS, will I be able to turn the heat and AC on and off, control the temperature, and also turn the heated seats on and off? I just want to know the additional features / controls I can have in the app. Thank you.

0

2014 audi a6 push to start unable to complete decryption process EVO-ONE

Im able to get the module into programing mode with the flashing red, yellow, and blue lights. The vehicle will shut down (key off) durring the process but will not key on. The key off happens near the end of the programing procedure i belive this is supposed to be a signal to key on and complete the key learning. I also notice the evo one will light blue when the fob is pressed but when remote start sequience is started no lights illuminate on the module. Im thinking firmware issue im running 60.10 as recomended and tried a few others. module # 002B04 266571

0

2014 audi a6 push to start unable to complete decryption process EVO-ONE

Im able to get the module into programing mode with the flashing red, yellow, and blue lights. The vehicle will shut down (key off) durring the process but will not key on. The key off happens near the end of the programing procedure i belive this is supposed to be a signal to key on and complete the key learning. I also notice the evo one will light blue when the fob is pressed but when remote start sequience is started no lights illuminate on the module. Im thinking firmware issue im running 60.10 as recomended and tried a few others. module # 002B04 266571

0

2014 Audi RS7 EVO ONE with Carlink ASCL6 4G

What remote start firmware should I used if I am adding a ascl6 carlink to my Evo-One?

0

2014 Audi RS7

What diode voltage do I need for the remote start installation?

0

Dcryptor's limit has been reached for this car 2014 Audi sq5

Hi, I need help with my EVO-AUDT1 I have it installed about a month ago, everything worked but not ok. Most of the time remote start won't work or at least not at the first try. Needs a couple of tries, lock, unlock and will eventually start. Today I had some time so I decided to remove the unit and change the settings (at the customer service recommendation to try the LOCK/UNLOCK/LOCK instead of what I initially had LOCK/LOCK/LOCK FOR REMOTE START). I did the settings change and installed back the module, the car will remote start much better than before (still failed a couple attempts but most of the time worked fine) however sometimes after shutting off engine and close the door the car will start! Just like that, after pushing ONE TIME ONLY the door lock button car will start. So I decided to revers the setting to what I initially had ( 3 x LOCK fosr remote start) at least this way the car won't start when simply lock. And from here programming issues begin : I was not able to have the remote starting working again. I fallowed the same programming procedure like before, on the computer everything seems to be fine but when connecting the module nothing, car won't remote start at all. I tried a couple of times step 1 for DCRYPTOR , ever time worked fine, but on the car won't start. I also tried and flashed not the recommended firmware version but the lattes one compatible for this module , (the 70) and repeat all the steps, still nothing. I eventually went back and flash the same version that I initially had ( the 60.08) and did the recommended settings, no change at all, with 3 x LOCK for remote start, fallowed successfully all the programing steps and nothing, car won't remote start. While I was doing the last try when I was running the dcryptor, I got the message of dcryptor limit have been reached for this car! I tried to reconnect the module and fallow the procedure for STEP 1 and nothing. Same message. Nevertheless, this is getting pretty frustrating... Also, the module I received shows manufacturing date beeing sometimes in 2018 and for my vehicle shows that compatible modules needs to be manufactured 2019 and up. I called customer service when I received the module and I have been told it doesn’t matter, will still work. And it did, but with the described issues, so I wonder if that may be the initial issue why car won't remote start as it should to begin with? How do I reset dcryptor's limit? And what could be the issue that car won't remote start even if the programing seems to be successful? I am pretty sure every time the connectors were well plugged * After talking with customer service this will be solved by sending a e-mail with the unit s/n for reset.

0

2014 Audi SQ5 problem with key programming

I am trying to get the Evo-All with the AUDT1 to work in my 2014 SQ5. The problem is during programing. I get to the point of all 3 lights flashing, then solid red, then I get flashing red every 1 second instead of red and yellow flashing. I put a new battery in the remote, and tried again. The second time, I got the red and yellow flashing, so I did the Decrypt. I was able to activate the Autostart with 3 lock butttons, but the car won't start without putting the key in the keyport. I get a red light, then a click and yellow light, then a red light. Then a red blink 3 times. The car doesn't start, so the 3 red is no tach signal, which makes sense. If I put the spare key in the keyport, then press 3 locks, the car starts right up. I think the decrypt didn't work. I tried a master reset, and retry configuration, but now I can't get the red and yellow again. I have tried 5 times, and can't get a key read off the keyport. iI have connected the t cable to the keyport, the brake cable, and the 2 canbus wires to the steering column can bus wires. When the EVO-ALL is trying to read the key, the car will show a Parking Brake Malfunction, the HVAC turns off and back on, then gives another Parking Brake Malfunction, then shows a red light, then a flashing red light. Not sure why the controller won't program correctly. Does anyone have any ideas?

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue