Evo-One installed in 2012 Infiniti QX 56 PTS using Guide # 33191 and RF 642W remotes installed using Guide # 33021. Using OEM Key Fob all functions work properly (unlock/lock/trunk open and use of remote starter). I have also installed the RF 642W remote and can get all functionality to work except the unlock door function.
All loose wires connected as per guide #33191 and as follows:
A2 (purple) soldered to red wire inside driver door panel; A3 (purple/ white) soldered to greed wire inside driver door panel
A8 (dk blue) soldered into gray red wire of 15 pin black BCM connector
A14 wire cut and A12 (pink) soldered into loose A14 wire going to t harness
A16 (purple/yellow) wire soldered into A10 (Lt. Blue/ Black) wire
A19 (black/white) wire soldered into brown PTS connector at pin 8 (light blue wire)
Brown wire soldered to 10 pin white connector (pin 8) at driver kicker's panel (blue/red not blue/orange)
Settings programmed for Fortin Module are as follows:
Bypass Module: A1-A11 (on), B1 (off), C1 & D2 (on), D3 - D5 (off), D6 (on)
Remote Starter Module 2 (2.3), 3 (1), 4 (4.1), 6 (6.1, 6.4-6.6 off), 7 (7.1), 8 (8.2), 9 (9.1), 10 (10.1), 11 (11.1), 12 (12.1), 13 (13.2), 14 (14.1), 15 (15.1), 16 (16.5), 18 (18.1), 19 (19.1), 20 (20.6), 21 (21.1), 24 (24.1), 25 (off), 26 (26.1), 29 (29.1), 30 (30.1), 31 (31.1), 32 (32.3), 33 (33.1), 34 (34.2), 35 (35.1), 36 (36.2), 37 (37.1), 38 (38.5), 39 (39.1)