I looked through previous questions and couldn't find the answer.......I have a 2007 Trailblazer with a Bulldog RS82 remote starter. The INT-SL is in datalink mode and has been working perfectly for over 4 years, operating the parking lights, heated seats, rear defrost, etc.
Just the other day my vehicle started shutting down about 10 seconds after startup via remote starter. I saw the bulletin about the false positive on the brake signal being communicated to the remote starter unit, so I tried the fix recommended there of grounding the green wire. However, doing this only seemed to disable the security bypass as the vehicle would then just crank and crank with no ignition. I disconnected the INT-SL and reset it several times to see if I could get any different result, but didn't.
I did isolate the issue to the INT-SL by ruling out the Bulldog unit as the problem. I did so by letting the remote starter start the vehicle, then unplugging the 4 wire connector from the INT-SL before the 10 second shut down, and the remote starter continued to keep the vehicle running.
The INT-SL is running firmware v. 3.01. I really don't want to have to try to hard wire into the parking lamps and lose the heated seats/rear defrost features. Any ideas on what else may be going wrong, or how to fix it? Please let me know. Thanks....
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
