Trying to install EVO-ALL (EVO-FORT1) with t-harness on my 2010 Mustang.
I've flashed to the latest firmware 71.43 and also tried 71.35. I've enabled option C1 and D1 as I intend to use it as a standalone remote starter.
I have spliced A1, A10 & A20 from the white 20-pin plug to the t-harness. I have spliced the CAN High and Low as appopriate.
The issue comes when I try to program the device with 2 keys. I place the unit into program mode, solid red, and turn each key for 3 seconds (until the security light goes out) and within 5 seconds press and hold the program button. The light remains solid red thoughout the process until I hold the program button where it cycles through the colours before eventually ending up with solid red and blue. The car never goes into ignition. The key bypass function doesn't work.
What am I doing wrong? :\
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
