Installed EVO-ALL and T-harness on 2008 dodge avenger. Configured it for standalone per guide #64051, connected green/red wire to purple and yellow to yellow in the T-harness. All other wires just taped back, no hood pin installed. EVO seemed to program correctly. Pressing 3X lock on remote turns on ignition, but car doesnt start. Also will not start with the key. Sets code P0513 - incorrect immobilizer key. I can remove the T-harness and reconnect the ignition plug back stock and the car starts like normal with the key. I tried several different configurations and updated then downgraded the firmware on the EVO, but nothing I did made any difference. It seems like the EVO is not managing the immobilizer function. SN: 001A07 096654. Any ideas?
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
