Utilisateur

I tried reply Jesus at my last question, but it won't go through. so I started here.

Hi Jesus,

I did the one TPMS wire cut when car started with the key as you said. The "low fuel level warning light" came on as soon as I cut the wire.

Now it is clear In my case seems like the two TPMS wires is not connected inside EVO ONE when remote started the car,

So, what is next step?

On DEC.8, 2021 I posted my question "H-KEY 2020 TOYOTA RAV4 LE EVO ONE WITH T-HARNESS REMOTE STARTER INSTALLED - SYSTEM MALFUNCTION" and got answer. I did what recommand to do, evnen hardwiring CAN HIGH/LOW  two wires and use RAV4 CAN connector plugged in ECU, no luck.

My rav4 remote start problem more like this after a few weeks oberservation

Use OEM remote or RFK442 remote, the low fuel yellow light show up after remote started, When going in the car, key in the key cylinder and turne to ON position, press brake, key taking over. The yellow low fuel light disappear, and fuel display needle moving up to level. After a few times remote starting, when you try another remote starting, the check engine light show up, and screen also shwing "AWD System Malfuntion. 2WD Mode Engaged, Visit you r dealer"

The CHECK ENGINE light was P2067: generic fuel level sensor "B" circuit low. I am wondering that low fuel level sensor B dosen't powered up  when remote started, then ECU set the CHECK  ENGINE light. I reset it by OBDII, but it keep coming. If no remote starting, RAV4 going normal by the OEM key and no warning light.

Is this could be a communication issue between EVO ONE and RAV4 ? The IGNITION signal from EVO ONE should go power up fuel level sensor B when remote starting, but it doesn't. 

Any idea? Could you please look at 2020 RAV4 LE AWD(Canadian version) wiring diagram, see how.

Thanks in advance! 

Just bought Fortin remote starter kit EVO-ONE with RFK442 THAR-ONE-TOY12 for this 2020 RAV4 LE, H-KEY. Installed yestoday, the OEM 3xlock working, fist try it remote started the car; programmed RFK 442 one remote, got remote started on first shot also, OEM key fob stay function. Good job. Moved car to drive way from garage, double check the lock and unlock fuctions again from both OEM and RFK442 remotes. Remote started car, when driving to street showing "system malfunction". I read those simillar questions, can't get answer. EVO ONE bypass firmware 88.20, remote start firmware 1.25. Please help. What should I check?