I have a 2017 Ford Explorer Police Interceptor. I installed an EVO-All using a Thar-For3 t harness. I used guide 69061 with 4.01 firmwear and 7 hardware version. Hood pin (Pink/Black) connected to ground, A16 (purple and yellow) and A1 (yellow) both connected to ignition wire. The explorer has no alarm system and no transponder. I connect the power and release the button on blue, then connect the remaining connections. When i turn the ignition to the on position the blue light flashes quickly without turning off. I then turend the ignition off and use the seperate key fob (lock,unlock, lock). The evo responds to the locking and unlocking then the red light blinks 5 times and then nothing. I can turn the car on with the key, remove the key and the car continues to run. The only way i can turn it back off is unplug the evo. Any suggestions to try? Thank you
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
