Wired and installed EVO ALL according to Guide 62951. I did not connect the park lights. All programming steps worked according to guide.
When I attempt to remote start by pushing lock 3X on the fob, the module will light up as follows.
The red LED will light up. 2 seconds after the red LED lights up the yellow LED lights up. They both stay on for 8 seonds and then both turn off. The process repeats a second time about 4 seconds after both LEDs turn off. After the second time nothing happens.
The blue LED on the module does flash when I hit Lock/Unlock on the fob.
I have tried remote starting with the Dark Blue wire for the safety switch grounded and not grounded with no difference.
The module has hardware version 6 and firmware update is 71.39. Options C1 and D1 are selected.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
