Guys - Setting up a 2015 Sequoia with Evo One/RF422/Toy7 harness with door lock data and disarm wires attached (per install sheet). Latest firmware. Everything works as expected except truck is unlocked before remote start and doesn't relock. Options set per recommendation:
2.4, 38.2 C1, D5 (lock after start)
Interestingly after remote starting and doing a status check with the 442 remote, the remote reports the truck as locked but it is not so the evo-one is somehow out of sync.
Saw a similar post for a tundra about just setting 6.3, which is what I was going to do. Wanted to get words of wisdom first since you cautioned me prior about possible issues when using settings that are on both the bypass side and the remote start side.
So do I set 6.3 and D5? Disable D5 and set 6.3? What's the recommendation
Thanks,
Mike
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
