In short my goal is to make the lock x3 work for me but the module is not sending any power from the main 6 pin harness as it should.
I have a 2015 Scion FRS with PTS and after a full day I figured out that no matter how many times I try the dcrytor didn't take the immobilizer data as a 2015 FRS. After some self troubleshooting I found out that I can get it to work if I put it down as a 2014 or 2015 Subaru BRZ with PTS. After going through all the steps and putting the EVO One back in the car it turns the yellow LED when in the ignition but does not do anything when trying to use the valet button, no horn no park lights and yes they are wired correctly and check with a multimeter to ensure the module is getting the signals. The blue LED does blink when I press the press the lock and unlock from my factory FOB but more strangely the factory alarm doesn't work anymore, if I click lock button on the FOB and manually open the door the alarm doesn't go off, it does nothing. The car does turn on fine apart of now having the airbag light on. This is driving me crazy and tech support hasn't been able to help much, they say "there's no reason it shouldn't work" I have double and tripled check the wiring and all connections are on the factory wires directly and securely. I can't find any info on this module being used on a BRZ or FRS so I'm starting to question the true compatibility or is there something wrong with this particular module. The AX-One is the same as the EVO One right?
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
