I installed my EVO in my 2015 Ram1500 SLT. After installation, the truck does start immediately without problems, but now on a couple occasions the truck has stalled when accellerating from a stop at low speeds and on other occasions every warning light on my gauge cluster will flash and my 2WD light will flash when going at normal cruising speed (45-60 mph) and I lose power. If I take my foot off the accelerator and coast, the lights will slowly go off and I resume control and acceleration. Anyone else experience this? My fear is that it is messing with the ECM Module. I used the T-Harness for the installation.