Hi, I have and Mazda3 2019 (with push start and presence key) and installed an Evo One + Thar-One-Maz5 + Evo Start2.
Everything works fine, except the lock status on the app is not correct - when I leave the car it auto-locks (because I'm taking the key with me), and if I check in the app it shows as unlocked. If i send a lock command, the command is sucessfull and the status changes to locked. Going back to the car, I'm able to unlock it by just touching the handle as usual.
I'm not sure if this info is useful, but during the setup I first forgot to connect the yellow wire between Evo Start2 and Evo One and paired both like this. When I noticed it was not working, I've checked all again, found the error, connected the yellow wire and paired again. The remote start by the app worked then, just left with the issue in the lock status.