Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

2020 corolla hybrid start wire & override switch

Today I installed the EVO ALL in my 2020 Toyota Corolla GR Sport Hybrid, unfortunately the hybrid start wire was too short because I wanted to mount the module all the way on the left behind the cover for easy access. However upon testing all still seemed to work (blower goes on, which for me is the most important, both in winter and in summer). My question is what exactly does this wire? I can simply extend the wire, but I feel a bit hesitant cutting and soldering the original wire (it is very thin, so I don't want to use a splice connector). I guess this is for the car to be able to start if the battery becomes low because of the blower (and lights and radio) going on? Also was wondering what the override switch does, suppose only as an emergency for when the EVO for some reason fails? There are a lot of spare wires, from the big white connector they seem spare I/O, but from the smaller white connector there are 2 orange wires which don't appear in the instructions. Wish the instructions explained all the connections a bit more.

0

2020 corolla hybrid start wire & override switch

Today I installed the EVO ALL in my 2020 Toyota Corolla GR Sport Hybrid, unfortunately the hybrid start wire was too short because I wanted to mount the module all the way on the left behind the cover for easy access. However upon testing all still seemed to work (blower goes on, which for me is the most important, both in winter and in summer). My question is what exactly does this wire? I can simply extend the wire, but I feel a bit hesitant cutting and soldering the original wire (it is very thin, so I don't want to use a splice connector). I guess this is for the car to be able to start if the battery becomes low because of the blower (and lights and radio) going on? Also was wondering what the override switch does, suppose only as an emergency for when the EVO for some reason fails? There are a lot of spare wires, from the big white connector they seem spare I/O, but from the smaller white connector there are 2 orange wires which don't appear in the instructions. Wish the instructions explained all the connections a bit more.

0

key override sl2

bonjour j aimerais savoir si un transponder key pass key override sl2 ,peut s installer sur un toyota matrix 2013 merci le dérarreur est un evo 300

0

ativation key say invalid?

bought 2 key override all modules. used the first one on a ford f150. no issues. going to install the second one on the wifes car this morning and went to get my wire color chart and the activation key says its invalid???? product service #000102338492

0

key override wont program

i have an 04 f-150 with viper carstarter and fortin bypass. i try to program the bypass but it wont work this is what iam doing. 1 press hold button 2insert connection one 3insert connection 2 4put key in and turn to on untill security light goes out 5 remove key and insert second key and repeat step 4 remove key and activate remote start now the led should go out but it doent it flashes once then stays solid any ideas as to why it wont program.i have check and rechecked and checked again with my wiring and all looks ok even had some one else go over it and they cant see anything wrong

0

key override wont program

i have an 04 f-150 with viper carstarter and fortin bypass. i try to program the bypass but it wont work this is what iam doing. 1 press hold button 2insert connection one 3insert connection 2 4put key in and turn to on untill security light goes out 5 remove key and insert second key and repeat step 4 remove key and activate remote start now the led should go out but it doent it flashes once then stays solid any ideas as to why it wont program.i have check and rechecked and checked again with my wiring and all looks ok even had some one else go over it and they cant see anything wrong

0

key override all not programming correctly

To Whom it May Concern, I have a 2006 toyota rav4. I have installed key override all bypass module with data link. Instructions inform me to hold the program button while inserting the 2 harnesses into the module. When i insert the black harness the led lights up solid immediatly then while still holding the program button i install the second harness and let go of the program button. The led light stays lit while i insert the vehicle key and after fully inserted i wait and the led never blinks like the instuctions say it should to prove the module has learned the key. the blue wire from the bypass module is hooked up to the negative running wire on the remote starter (compustar CS800-S). The vehilce doesnt turn over but attemps to start then shuts down for a total of 3 attempts. Is there anything else i should be aware of? Is the bypass module working properly? Any help would be appreciated. thank you.

0

key override all not programming correctly

To Whom it May Concern, I have a 2006 toyota rav4. I have installed key override all bypass module with data link. Instructions inform me to hold the program button while inserting the 2 harnesses into the module. When i insert the black harness the led lights up solid immediatly then while still holding the program button i install the second harness and let go of the program button. The led light stays lit while i insert the vehicle key and after fully inserted i wait and the led never blinks like the instuctions say it should to prove the module has learned the key. the blue wire from the bypass module is hooked up to the negative running wire on the remote starter (compustar CS800-S). The vehilce doesnt turn over but attemps to start then shuts down for a total of 3 attempts. Is there anything else i should be aware of? Is the bypass module working properly? Any help would be appreciated. thank you.

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer