The start-stop button is given a minus twice, with an interval of 3-4 seconds. We have to move the instrument panel frame to get to the button connector. There was a whitish line.
I fitted a 12-ring loop to the rear cylinder of the start-stop button. I removed the battery from the key and attached a 2 cm diameter 12-ring loop to the logo.
I cut the gray wire on the brake connector with the relay contacts and gave a plus to the light blue wire.
To turn off the engine, it takes 3-4 seconds to give a minus to the start-stop button, and then a minus impulse to the door button... Behind the kick panel there was a light blue wire. The door lock-unlock lines were also there...purple and beige.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
