install a compustar cs800 along with the fortin key override all with firmware 4.06. everything is hooked up and the fortin program correctly with the 10 blinks. When I try the remote start it will attempt to start the car, I hear the starter crank then it cuts out right before it turns over. When I use the key car turns on just like normal. When I unplug the fortin bypass and use the key it will do the same thing, try to start n cut out before turning over. I believe the fortin is install and program correctly.
Also before installing the bypass I tried to start it with just the remote start and samething. Car will attempt to start and cut out. Any help would be appericated. I try reprogramming the fortin like 10x already
TIA
UPDATE
So there was 2 IGN wire, hooked it up to IGN 1 and now it will work with the key in the IGN, but when I take the key out it will try and crank but wont turn over, I try to reprogram the fortin again but same thing.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
