Hi. I'm starting an installation on a 2010 Camry with a "Dot" key tomorrow. Wondering if there is any clarification or update on which wiring schematic to use- can I wire through the Can Bus or must I use the RX/TX? If it must be through the RX/TX can the bypass module still be directly wired to things like hood status, tachometer, lock/unlock, etc with that information passed to a remote start module through the D2D link as shown in the G key wiring? I would like to try to wire through the Can Bus first and if that doesn't work hoping I can just disconnect the Can Bus wires and connect the RX/TX and Keysense wires and have it work without having to reconnect all other wires direct to the remote starter.