Questions & Réponses

I follow the Guide # 27481 Connection 2 , Programming 2 , also did lock/unlock, Horn, disarm, GWR to Key Sense  and foot brake wires. When using the Drone app to start the car it would not start or do anything at all, no parking light flash, no light from the 3 LED beside the red light by the yellow wire cut loop.

When the lock/unlock  on the Drone app is press the door would  lock/unlock/disarm parking light flash and still no start. I have reset and master reset the module, reprogram, check all the  wires and relocate the ground wire still won't start or hear the relay.

Did I not program it right or am I missing some wires connection?

Bypass Firmware version: 73.26

Remote Starter Firmware version: 0.50 Drone

What I have hook up

(6-PIN) POWER CONNECTOR

(+) Ignition Pink to Black/Yellow car (+) Ignition

(+) Starter Yellow to Black/White car (+) Starter

(+) Accessory Orange to Yellow car (+) Accessory

(+) Parking Light White to Red/Black car (+) Parking Light

(+) 12v Red to White car (+) 12v

(6-PIN) BYPASS RELAY

D6 White/Red to Pink (cut) at Ignition barrel going out  pin 5 Security Light

D4 White/Green to Pink (cut) at Ignition barrel side of pin 5 Security Light  

(20-PIN) SECONDARY CONNECTOR

A1 to (+) Ignition

A2 to (-) Black/Orange car Lock

A3 to (-) Blue/Orange car Unlock

A6 to (-) Pink/Black Disarm

A7 to (-) lt. green/blue Horn

A8 to blue/black Key Sense

A10 to Red/Green Data Pin2

A11 to (+) White/black Brake wire

Would it be better to used RF kit before the Drone, seem the Alarm is working but not the remote start.  

Well, right now the Evo one is out of the car so I won’t be able to go at it until the weekend the only time I’m free. Any help would be great or  anyone who have done 2005 Honda Pilot  Evo One with Drone with some input how you got it to work would be great too.

Thank you,

I follow the Guide # 27481 Connection 2 , Programming 2 , also did lock/unlock, Horn, disarm, GWR to Key Sense  and foot brake wires. When using the Drone app to start the car it would not start or do anything at all, no parking light flash, no light from the 3 LED beside the red light by the yellow wire cut loop.

When the lock/unlock  on the Drone app is press the door would  lock/unlock/disarm parking light flash and still no start. I have reset and master reset the module, reprogram, check all the  wires and relocate the ground wire still won't start or hear the relay.

Did I not program it right or am I missing some wires connection?

Bypass Firmware version: 73.26

Remote Starter Firmware version: 0.50 Drone

What I have hook up

(6-PIN) POWER CONNECTOR

(+) Ignition Pink to Black/Yellow car (+) Ignition

(+) Starter Yellow to Black/White car (+) Starter

(+) Accessory Orange to Yellow car (+) Accessory

(+) Parking Light White to Red/Black car (+) Parking Light

(+) 12v Red to White car (+) 12v

(6-PIN) BYPASS RELAY

D6 White/Red to Pink (cut) at Ignition barrel going out  pin 5 Security Light

D4 White/Green to Pink (cut) at Ignition barrel side of pin 5 Security Light  

(20-PIN) SECONDARY CONNECTOR

A1 to (+) Ignition

A2 to (-) Black/Orange car Lock

A3 to (-) Blue/Orange car Unlock

A6 to (-) Pink/Black Disarm

A7 to (-) lt. green/blue Horn

A8 to blue/black Key Sense

A10 to Red/Green Data Pin2

A11 to (+) White/black Brake wire

Would it be better to used RF kit before the Drone, seem the Alarm is working but not the remote start.  

Well, right now the Evo one is out of the car so I won’t be able to go at it until the weekend the only time I’m free. Any help would be great or  anyone who have done 2005 Honda Pilot  Evo One with Drone with some input how you got it to work would be great too.

Thank you,

I follow the Guide # 27481 Connection 2 , Programming 2 , also did lock/unlock, Horn, disarm, GWR to Key Sense  and foot brake wires. When using the Drone app to start the car it would not start or do anything at all, no parking light flash, no light from the 3 LED beside the red light by the yellow wire cut loop.

When the lock/unlock  on the Drone app is press the door would  lock/unlock/disarm parking light flash and still no start. I have reset and master reset the module, reprogram, check all the  wires and relocate the ground wire still won't start or hear the relay.

Did I not program it right or am I missing some wires connection?

Bypass Firmware version: 73.26

Remote Starter Firmware version: 0.50 Drone

What I have hook up

(6-PIN) POWER CONNECTOR

(+) Ignition Pink to Black/Yellow car (+) Ignition

(+) Starter Yellow to Black/White car (+) Starter

(+) Accessory Orange to Yellow car (+) Accessory

(+) Parking Light White to Red/Black car (+) Parking Light

(+) 12v Red to White car (+) 12v

(6-PIN) BYPASS RELAY

D6 White/Red to Pink (cut) at Ignition barrel going out  pin 5 Security Light

D4 White/Green to Pink (cut) at Ignition barrel side of pin 5 Security Light  

(20-PIN) SECONDARY CONNECTOR

A1 to (+) Ignition

A2 to (-) Black/Orange car Lock

A3 to (-) Blue/Orange car Unlock

A6 to (-) Pink/Black Disarm

A7 to (-) lt. green/blue Horn

A8 to blue/black Key Sense

A10 to Red/Green Data Pin2

A11 to (+) White/black Brake wire

Would it be better to used RF kit before the Drone, seem the Alarm is working but not the remote start.  

Well, right now the Evo one is out of the car so I won’t be able to go at it until the weekend the only time I’m free. Any help would be great or  anyone who have done 2005 Honda Pilot  Evo One with Drone with some input how you got it to work would be great too.

Thank you,