I have a different problem than the other NO KEY DETECTED questions in the forum.
1. I have a flash updater ( most current flash)
2. I checked all the wiring and voltages
3. Using the Fort1 on 2014 Transit Connect XL with no existing remote start
After programming with the 2 key method, the read out says NO KEY DETECTED and the car does not start, but the car goes into run mode. After reinsterting the key, the car still will not start with the key, until the EVO is unplugged.
After programming with the Dcrytor method, the Fortin Updater says there is no key data.