Recherche rapide
Trouvez la bonne solution pour votre véhicule.

Questions & Answers

EVO-START2 Installation with EVO-ONE on Mitsubishi Outlander: Which connection model?

0 votes
Car is a 2016 Mitsubishi Outlander GT 3.0 PTS.

Everything was installed as per the instructions (EVO-ONE) and the software was updated as reccomended. The OEM key turns on the car without any problems.

When adding the EVO-START2, I realized that the BLACK 4-PIN CONNECTOR was not included with the EVO-START2 packaging. Before ordering the proper cable, I was wondering which connection (1. high powered, 2. low powered RF2A, 3. low powered with THarness) model I need to do with my car (as per the EVO-START2 installation guide).

I searched and saw that you don't sell a Mitsubishi Outlander THarness of any kind... so connections 1 and 3 seems out of the question, but I wanted to double check before ordering the RFA2A connector for connection 2.
posté Mar 6, 2019 dans la catégorie Mitsubishi par Alex B (280 points)

1 Réponse

+1 vote
Meilleure réponse
With the evo one you simply plug in to blue connector from the antenna cable into the small blue port on the evo-one. No adapater or power connections ndeeded.


Connect the loose yellow wire to igniiton


Then program the antenna to the module as shown in the guide below.
répondu Mar 6, 2019 par Derek (227,000 points)
élue Mar 7, 2019 par Alex B