I am installing an Evo-All into a 2008 Altima and using the OEM remote as the first choice for the install.
I understand from previous Q&A posts that the Evo-All can be used as a stand alone remote start in this model year but because it cannot detect the lock/unlock on the CAN BUS it will need to use a separate RF Kit or an Universal Trigger connected to the external input of the Evo-All.
Also The Evo-All needs to detect the unlock pulse to allow key take over. A suggestion was to see if pin 15 on the BCM tests negative with a press of the unlock of the factory remote to connect the unlock input of the Evo-All to that. (Assuming that this pulses not only with the remote but also with a press of the door button)
For the questions.
If pin 37 on the BCM pulses negative with each remote lock press, could you just connect the Evo-All lock in wire to that pin to allow 3x remote start?
One of the optional connections is to have the Evo-All lock out connected to pin 37 on the BCM and the unlock out to pin 15 on the BCM. Is it okay to have the Evo-All lock in and lock out connected to pin 37 and the unlock in and unlock out to pin 15 without causing problems.