I own a 2021 Mazda MX5 Miata RF GT in a manual transmission. I'm using the EVO-ONE with the THAR-ONE-MAZ3 T-Harness. I've made sure to splice the white cable (Manual only) with the corresponding white pin A5 on the 20 pin connector for the clutch bypass .I've actually gone through a couple configurations and at this point, I chose to use suggested settings as well as the settings the manual insisted. I've also enabled 3x OEM lock since I want to use my own remote. So far, once I initiate the ready mode sequence, I triple click the lock button and the car cranks for a bit but doesnt start. I've been through the settings a couple of times over to check everything and its not clear to me what might be causing it. Please let me know if there is any additional wiring needing to be done or a certain setting that's causing it not to work. I'm so close to a successful start, yet so far.