Recherche rapide
Trouvez la bonne solution pour votre véhicule.

Questions & Answers

2017 Nissan Sentra KEY BYPASS PROGRAMMING problem

0 votes

Hi there! 2017 Nissan Sentra SV 

I am useng EVO ALL, wire to wire conection.
KEY BYPASS PROGRAMMING PROCEDURE 2/2, step 8. The BLUE LED should Flash rapidly, after RED turn OFF. RED turn OFF, but BLUE keeps solid ON. Also, before step 7, some times, RED LED turn OFF before I press the START/STOP button twice to turn ON the ignition. All time I hold the OEM remote (without battery) close to the front of START/STOP button like the manual show. I can't move to the next step. By the way, does the manual said: NOTE, Parts required (Not included) 1X Fuse 1X multimeter 1X Diode. Where am I supposed to use that DIODE?
Please let me know how to fix it, thanks. 
posté Fev 7 dans la catégorie Nissan par Munito (950 points)
modifié Fev 7 par Munito

1 Réponse

0 votes
Meilleure réponse
If blue does not flash I would take a look at your can hi and can lo connections.


This is taking into account you have flashed the module with the correct firmware (72.xx) for the vehicle.
répondu Fev 8 par derek ! (277,630 points)
élue Fev 15 par Munito

Here is my humble contribution to this website: 

Step 7 - Hold the OEM remote close to
the front of START/STOP button. 
Press and release the foot-brake pedal. 
The BLUE LED and RED LED turn ON. 
(NOTE: you have 3 second to continue with step 8 and LED RED turn OFF) 
Step 8 - Press the START/STOP button twice to turn ON the ignition. Both LED will turn OFF. The BLUE LED will Flash rapidly.
Step 9 - Press the START/STOP button once to turn OFF the ignition. Wait until the BLUE LED flash slowly.

Pin 8 in ODB2 conector is Gray do not Lt.Green. Please fix the scheme and fix the picture.

You can check the car by the VIN number: 3N1AB7AP0HY350722 and all the information that I have shared with you to verify that all my evidence is real. Kind regards. 







Le savoir-faire au travail est l'ultime outil en ligne pour les installateurs de démarreurs à distance et de systèmes d'alarmes. Le site fourni des informations sur le cablage et des photographies détaillées des processus d'installation.


Recevez nos nouveautés
par courriel.