Recherche rapide
Trouvez la bonne solution pour votre véhicule.

Questions & Answers

2005 Jeep Grand Cherokee, Turns on but no crank, no start.

0 votes

Installing Evo All, stand alone with Thar-CHR5 harness. Ignition and MUX wires are connected, module is programmed, key is programmed. Dash lights up, fuel pump buzzes but not start. 

With the harness, I connected the yellow-yellow (ignition), green/red-purple (MUX), and white/red-pink/orange (starter) wires. is there something I'm missing?

posté Jan 16 dans la catégorie Jeep par Andy Sicard (200 points)

2 Réponses

+1 vote
Double-checked the spliced wires going into the ignition harness.  I had read the diagram incorrectly in the instructions - I had to flip it over 180 degrees.  Remote start is working now.
répondu Jan 22 par Andy Sicard (200 points)
0 votes
I would start by metering the starter wire on the OEM connector when remote starting to see if its actually getting energeized.
répondu Jan 17 par derek (270,020 points)
Hi Derek, Thanks for the suggestion.  I put a meter on the starter wire connection and tried to remote start. When idle, I was seeing 5.4VDC and when the remote starter kicked on, it dropped to 0VDC. Does this mean I should be using a different wiring configuration?  Thanks
...

Wirecolor.com

Le savoir-faire au travail

WireColor.com est l'ultime outil en ligne pour les installateurs de démarreurs à distance et de systèmes d'alarmes. Le site fourni des informations sur le cablage et des photographies détaillées des processus d'installation.

Infolettre

Recevez nos nouveautés
par courriel.