Recherche rapide
Trouvez la bonne solution pour votre véhicule.

Questions & Answers

blue led doesn't stay lit while trying to program

0 votes
Can't get past first step of programming. I release the button while the led is blue but it goes out.
posté Nov 30, 2021 dans la catégorie Chevrolet par Brian Deal (130 points)

1 Réponse

0 votes
I would check to see if there is power present on the yellow wire of the 20 pin connector. That wire should only have power when the key is on.
répondu Nov 30, 2021 par derek ! (279,120 points)
It doesn't have power until the key is on. I have tried a bunch of times to get this programed. I suspect it may be a faulty module.
If it is an evo-one you would also want to check the large pink wire on the 6 pin for the same criteria.

 

Also ensuring you have the correct firmware flashed into the unit for the installation type and vehicle being worked on is a good thing to double check.
...

Wirecolor.com

Le savoir-faire au travail

WireColor.com est l'ultime outil en ligne pour les installateurs de démarreurs à distance et de systèmes d'alarmes. Le site fourni des informations sur le cablage et des photographies détaillées des processus d'installation.

Infolettre

Recevez nos nouveautés
par courriel.