I have installed a EVO-ALL into my 2013 F-150 with a Viper 5706v connected with datalink for the range of the remote, and the 2-way capabilities. Now when I start the vehicle, it immediately sets off the Viper alarm and shuts off the vehicle because the door opened, I believe do to the EVO-ALL RAP disable it seems to simulate opening the door on both startup and shutdown. If I put the viper in Valet mode, disabling the alarm, it works fine, but then I don't have the 2-way of the viper alarm to know when it is going off. I also cannot unlock the vehicle using the viper remote because it sets off the OEM vehicle alarm. If anone know how to fix this issue so I have the Viper alarm still working, please help, I do need RAP disable though, because otherwise my radio will stay on until I open the door.
EDIT: I also have been unable to find a way to connect the Evo-ALL to disarm the factory alarm, I think this would fix the factory alarm issue, it should be able to do it over the can-bus but cannot find and option for this.