This is a 2012 Audi Q5 with key slot.
EVO AUDT1 Module S/N 001A07152594
flashlink programming was updated and the latest software is installed. version 4.51 firmware 60.08 hardware 7.0
Wiring to the can bus and brake was connected.
Performed all wiring installation as intructions stated.
Programmed the module SEVERAL TIMES.
Upon installation into the t harness, I have No lights on the module.
Now the Key will not start the car. Remote key will only lock/unlock car
removed the T harness from the vehicle and the car will still not start.
Acts as thou the vehicle does not recognize the key.