1. Ford Kuga car of 2016 until the last restyling, automatic transmission, PST.
2. Installed Fortin 6 №001A06757538, firmware version 71.43.
3. All necessary commands are executed, but when the engine is muffled from the key, the car turns off the engine, turns off the radio, turns off the screens and is armed. The current consumption from the battery 2A and does not change for a long time (more than 2 hours). which leads to discharge of the battery. In the standard mode, after 15 minutes, the current is 0.03A. Obviously, the car does not fall asleep when working with Fortin.
4. Fortin installation was made according to the scheme 34911. The question on the connection of the connector B, if there is no RF, it is necessary to connect B3 and B4 to ground and 12V respectively? The lack of such connections can affect the fact that the car does not fall asleep?
5. Recommend the firmware version of Fortin for correct operation with my car. Maybe it's 71.39? Will the car sleep properly with it, or does the version of the firmware affect it?
Vladimir.
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
