Installing EVO-ALL bypass with RS7-G4 Cool Start on older Ford Explorer without CAN data. Remote start will work with key in ignition and EVO-All disconnected. When EVO-ALL is added, the EVO-ALL indicates it accepts the 1 key programming. When a remote start command is given the red LED lights on the EVO-ALL and stays on during start sequence. The engine cranks but does not start. During cranking the dash THEFT indicator light blinks rapidly as if the PATS system is not receving any indication of security code. Have tried multiple series of programming for keys and wire connections with no success. Have tried chaging data link configuration in the RS7 with no change in performance. It does not appear wiring remote start directly to EVO-All instead of using datalink wire will resolve EVO-ALL either not sending code to pats or sending incorrect code to PATS.
Added wiring to door status circuit along with 6 pin connector D for battery power, start circuit and ignition circuit. EVO ALL still does not supply code correctly to PATS system. Have tried programming as a one key and two key install. EVO ALL indicates it accepts programming for both configurations. During remote start command EVO only lights the red LED and no otther LEDs come on. Is this the correct lighting pattern for the EVO or should it also light the yellow LED?
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
