I have a THAR-ONE-MAZ3 harness with an Evo One for a 2015 Mazda 3 manual push to start. I'm looking at guide 68261 and I see 2 discrepancies in the pin-out from the 20 pin harness:
First, the guide shows that there should be 5 wires going into the harness from the 20 pin connector (A20-A16). There are only 4. The 5th wire (A16) does not go into the harness. The guide also mentions this wire should be purple/yellow, but it is white in the 20 pin connector.
Second, the clutch bypass wire in the harness (A5) is the purple/yellow wire (not the white wire as shown in the guide). Seems these wires are swapped and one of them isn't
Assistance would be appreciated!