Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

How do I keep my parking headlights on when using EVO ONE with THAR-MAZ03

How do I keep my parking headlights on when using the factory remote starter via EVO ONE. Using THAR-MAZ03 for EVO One on Mazda CX5 2019 GS Push to start automatic? Installed remote starter: EVO ONE MAZ3 with THAR ONE MAZ3 Running on latest firmware Car model and Make: Mazda CX5 2019 GS 4DR Push to start Automatic

0

2016 Mazda CX-9

Installing an Evo One with a THAR-ONE-MAX3. Programming goes through smoothly, decrpyts on the Flashlink fine, re-install, and remote start will not function. I have tried resetting the bypass and decrypting multiple times, checked to insure it is not in valet mode, and re-updated the firmware for both bypass and remote start twice before reinstalling to only get the same result. I have also tried lock, lock, lock and lock, unlock, lock, all times and neither works. I have not hooked up tail lights or pin switch as they are supposed to be controlled by data bus. If this is wrong please let me know.

0

When I remote start the vehicle does a parking lights need to come on w/ automatic headlights?

I want to know if my car parking lights need to come on after I remote start 3X Lock., cause my vehicle comes with automatic lights on and if I need to bring it back to the dealer to fix this problem

0

Light connections on 2018 Mazda CX-5

Has anyone made the light connection on the 2018 Mazda CX-5. I understand that you have to remove the light switch to access the wires. I'm just wondering how involved this was as I'm not looking to cause any unnecessary damage to my wife's new car?

0

Light connections on 2018 Mazda CX-5

Has anyone made the light connection on the 2018 Mazda CX-5. I understand that you have to remove the light switch to access the wires. I'm just wondering how involved this was as I'm not looking to cause any unnecessary damage to my wife's new car?

0

2017 mazda cx-5 evo-one everything work but no parking light flashes on horn.

so i have installed everything. everything is functional which is the alarm and remote start. the remote start would light up all the light but when my alarm is on, there is not a single light indicated that my alarm is on but i can hear the horn. the white/blue, white/red and white/green is connected just like the wire diagram said with the thar-one-maz3. i installed the oem hoodpin which is better then the one that was in the package. my unit is in the car so im not going to add that.

0

blank after keys programmed and car doesn't start after correct installation

Mazda CX-5 2016 auto w/ push to start
Parts Used: Evo-ALL with THAR-Maz1 hardness
Guide Used: 62951
Wires hooked up:
Parking Lights- Yellow/Red, Yellow/Blue, Yellow/Green
Connector A into Connector C and Connector B plugged into Plug 1.
Data Door Lock- Lt. Blue to Green/Orange
Data Key- Lt Blue/Black to Black/White
Yellow- Nothing NO RF KIT USED
White and Black plugs on end of 4-wire Data plug- nothing (NO RF KIT USED)
(-) Lock, (-)Unlock, Start/Stop External- None hooked up, USING OEM KEYS TO START.No Hood Pin installed, Hood Pin Wire connected to Black Wire (PA-pin7-PB-pin11) in Fusebox

 

After completing step 12 on guide the yellow light turns off and nothing happens. The unit just goes blank. First thing I did was try to find a solution. Then I reflashed the unit with the firmware and tried it all over again. Nothing changed still all same results so I went over all the connections I made and all are firm and good connections. I don't don't get any flashing lights to indicate a fault either.

 

I have solved all issue, please read my replies. if I can help post or email me at matthew.irizarry.mi@gmail.com I will try to assist you if you have the same car and unit as I do.

0

blank after keys programmed and car doesn't start after correct installation

Mazda CX-5 2016 auto w/ push to start
Parts Used: Evo-ALL with THAR-Maz1 hardness
Guide Used: 62951
Wires hooked up:
Parking Lights- Yellow/Red, Yellow/Blue, Yellow/Green
Connector A into Connector C and Connector B plugged into Plug 1.
Data Door Lock- Lt. Blue to Green/Orange
Data Key- Lt Blue/Black to Black/White
Yellow- Nothing NO RF KIT USED
White and Black plugs on end of 4-wire Data plug- nothing (NO RF KIT USED)
(-) Lock, (-)Unlock, Start/Stop External- None hooked up, USING OEM KEYS TO START.No Hood Pin installed, Hood Pin Wire connected to Black Wire (PA-pin7-PB-pin11) in Fusebox

 

After completing step 12 on guide the yellow light turns off and nothing happens. The unit just goes blank. First thing I did was try to find a solution. Then I reflashed the unit with the firmware and tried it all over again. Nothing changed still all same results so I went over all the connections I made and all are firm and good connections. I don't don't get any flashing lights to indicate a fault either.

 

I have solved all issue, please read my replies. if I can help post or email me at matthew.irizarry.mi@gmail.com I will try to assist you if you have the same car and unit as I do.

0

blank after keys programmed and car doesn't start after correct installation

Mazda CX-5 2016 auto w/ push to start
Parts Used: Evo-ALL with THAR-Maz1 hardness
Guide Used: 62951
Wires hooked up:
Parking Lights- Yellow/Red, Yellow/Blue, Yellow/Green
Connector A into Connector C and Connector B plugged into Plug 1.
Data Door Lock- Lt. Blue to Green/Orange
Data Key- Lt Blue/Black to Black/White
Yellow- Nothing NO RF KIT USED
White and Black plugs on end of 4-wire Data plug- nothing (NO RF KIT USED)
(-) Lock, (-)Unlock, Start/Stop External- None hooked up, USING OEM KEYS TO START.No Hood Pin installed, Hood Pin Wire connected to Black Wire (PA-pin7-PB-pin11) in Fusebox

 

After completing step 12 on guide the yellow light turns off and nothing happens. The unit just goes blank. First thing I did was try to find a solution. Then I reflashed the unit with the firmware and tried it all over again. Nothing changed still all same results so I went over all the connections I made and all are firm and good connections. I don't don't get any flashing lights to indicate a fault either.

 

I have solved all issue, please read my replies. if I can help post or email me at matthew.irizarry.mi@gmail.com I will try to assist you if you have the same car and unit as I do.

0

CX-3, Why are parking light switch taps and splices called "optional?

I installed the Evo one and the Maz 3 harness, and all works fine. I spliced into the light switch, labeled "optional", and the parking lights come on as expected when in auto start. But now I see a connection at A19 of the white connector that seems to duplicate the same parking light output. So why was the light switch tap and splice labeled "optional"? Could I have avoided this light switch tap and splice if it's already made at A19? The switch taps and splices are the most difficult part of the install with the Maz3 harness, so what is optional about it?

0

mazda 3 evo-one park light installation

wouldnt be easier to install the park light the same way has the cx-5 thru the flasher arm.

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue