I'm going nuts. I've tried everything multiple times and still struggling with this.
Blue leds flash with every button. I am getting red and yellow leds when I try to start with 3x lock. The relay for the lights click several times. I keep reading that it should be the hood pin, but when I try jumping the pins under the hood, my car goes nuts and throws a ton of errors. I tried grounding the blue wire from the large connector on the evo-all, and then it wouldn't even attemt to work. (I disconnected that wire.) I've been through every connection several times with a volt meter checking continuity and I just can't seem to find anything to solve this. Is it in my options?
I went back to the Flashlink and changed all the settings to default suggested settings.
I'm getting 4 or 5 light flashes. I know the fobs are not in the car. So, it has to be hood.?
Never mind, Got it... the wire I used under the hood to jump the pin was frayed a little at the end and must have been shorting on a nearby pin. I know I ran accross someone else's question with the same errors on the dash. I hope this helps. Cheers!
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
