Français
My account Register
Français
EVO-START Wirecolor

Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

ESTIMATED TOTAL:

Checkout

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

Clear All
Collapse All
Expand All
Clear All
Collapse All
Expand All
picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question
RÉCENT HOT! MOST VOTES MOST ANSWERS MOST VIEWS

27/12/2017

 Lexus Marquie Board (580Pts.)

0

2007 ES350 EvO One will not crank when remote start.

I have installed all the wiring according to Guide #19101. The module appears to successfully have programmed to the car, however, when I do the 3 button push on the factory remote it does not start the car. I have attached the rf642 and was able to successfullly program one of the remotes. When I try to start the car via the 2 way remote, the parking lights come on and it it looks like it is trying to start, however, none of the dash lights come on. The red led by the cut loop wire is blinking and after about 30 seconds it quits attempting to start. I can also hear sounds in the car as if something was activated, When it finally quits, the partking lights appear to blink 4 times, which should indicate no tach. But Im not sure what to look for in that. And finally, the 2 way remote was controlling the locks at one point, but that has stopped and I am not able to program the second remove via the valet switch or by the ign on off on method. Edit: I have been able to get the other remote to program and now the remotes are making calls to the bypass/RS, however, when I try to RS the car it clicks, RED LED comes on, but it does not go ignition. After it fails twice, the lights blink 4 times still. Not sure why it wouldnt be getting tach at this point.
Login to reply View 3 answer(s)

20/12/2017

 Lexus Marquie Board (580Pts.)

0

07 ES350 Wont Program - light stays solid red after final step

Installing an EVO One on an 07 Lexus ES350 per the regular installation with takeover instructions. I have all of the wires installed correctly with good taped up connections. However, when I go to program in the final step, the light blinks red (appears to be about 15 times and not 10), then stays solid red. I have checked the ignition connection several times and it is solid. Prior to installing this model, I had an EVO All installed with this same ignition wire and it was working fine. The only reason I wanted to swap models was for the take-over capability. Any ideas?
Login to reply View 2 answer(s)

27/12/2017

 Lexus Marquie Board (580Pts.)

0

2007 ES350 EvO One will not crank when remote start.

I have installed all the wiring according to Guide #19101. The module appears to successfully have programmed to the car, however, when I do the 3 button push on the factory remote it does not start the car. I have attached the rf642 and was able to successfullly program one of the remotes. When I try to start the car via the 2 way remote, the parking lights come on and it it looks like it is trying to start, however, none of the dash lights come on. The red led by the cut loop wire is blinking and after about 30 seconds it quits attempting to start. I can also hear sounds in the car as if something was activated, When it finally quits, the partking lights appear to blink 4 times, which should indicate no tach. But Im not sure what to look for in that. And finally, the 2 way remote was controlling the locks at one point, but that has stopped and I am not able to program the second remove via the valet switch or by the ign on off on method. Edit: I have been able to get the other remote to program and now the remotes are making calls to the bypass/RS, however, when I try to RS the car it clicks, RED LED comes on, but it does not go ignition. After it fails twice, the lights blink 4 times still. Not sure why it wouldnt be getting tach at this point.
Login to reply View 3 answer(s)

27/12/2017

 Lexus Marquie Board (580Pts.)

0

2007 ES350 EvO One will not crank when remote start.

I have installed all the wiring according to Guide #19101. The module appears to successfully have programmed to the car, however, when I do the 3 button push on the factory remote it does not start the car. I have attached the rf642 and was able to successfullly program one of the remotes. When I try to start the car via the 2 way remote, the parking lights come on and it it looks like it is trying to start, however, none of the dash lights come on. The red led by the cut loop wire is blinking and after about 30 seconds it quits attempting to start. I can also hear sounds in the car as if something was activated, When it finally quits, the partking lights appear to blink 4 times, which should indicate no tach. But Im not sure what to look for in that. And finally, the 2 way remote was controlling the locks at one point, but that has stopped and I am not able to program the second remove via the valet switch or by the ign on off on method. Edit: I have been able to get the other remote to program and now the remotes are making calls to the bypass/RS, however, when I try to RS the car it clicks, RED LED comes on, but it does not go ignition. After it fails twice, the lights blink 4 times still. Not sure why it wouldnt be getting tach at this point.
Login to reply View 3 answer(s)

20/12/2017

 Lexus Marquie Board (580Pts.)

0

07 ES350 Wont Program - light stays solid red after final step

Installing an EVO One on an 07 Lexus ES350 per the regular installation with takeover instructions. I have all of the wires installed correctly with good taped up connections. However, when I go to program in the final step, the light blinks red (appears to be about 15 times and not 10), then stays solid red. I have checked the ignition connection several times and it is solid. Prior to installing this model, I had an EVO All installed with this same ignition wire and it was working fine. The only reason I wanted to swap models was for the take-over capability. Any ideas?
Login to reply View 2 answer(s)

13/11/2016

 Lexus Hamza Amin (160Pts.)

0

Best system for 2007 Lexus GS350 PTS

Hey guys, With winter just around the corner, I wanted to get my 2007 Lexus GS350 PTS fitted with a remote starter. I've purchased the EVO-All for my 2009 Accord in the past and used it with a ProStart 2-way system without any issues. However, this time around, I want to program my OEM Lexus key fob to start the car. Is this possible? If so, what module(s) would I purchase?
Login to reply View 2 answer(s)

13/11/2016

 Lexus Hamza Amin (160Pts.)

0

Best system for 2007 Lexus GS350 PTS

Hey guys, With winter just around the corner, I wanted to get my 2007 Lexus GS350 PTS fitted with a remote starter. I've purchased the EVO-All for my 2009 Accord in the past and used it with a ProStart 2-way system without any issues. However, this time around, I want to program my OEM Lexus key fob to start the car. Is this possible? If so, what module(s) would I purchase?
Login to reply View 2 answer(s)

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue