Hello there,
I have an EVO-ALL (service # 001A06416265) with a Crimestopper LCPro-4. It has been working just fine on my 2006 Ram 1500 up until recently. I recently bought two Sentry Keys for my truck, which I programmed myself using the customer key programming described in the Dodge owner's manual. I have a total of 5 keys for the truck now, all of them work properly.
The problem I am experiencing - whenever I remote start the truck, the red security light in the instrument cluster blinks. It continues to blink even after I insert a key and take over from remote start. The only way to get the light to shut off is to shut off the truck and restart with the key. The odd thing is the truck starts and runs just fine when remote started...everything works the same as it did before, but now that security light blinks.
I plugged my OTC Genisys scan tool into the truck and get a code: P0513 "invalid SKIM key". I cleared the codes. The same code comes back if I remote start the truck.
I did a Master Reset on my EVO-ALL module, and went through the programming procedure on it again. It completed programming successfully. No change. All functions still work, but the red light is still blinking when the truck is remote started.
Thanks in advance for all your help!
-Darren Asuncion
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
