Quick Vehicle Finder
Find the right solution for your vehicle

Questions & Answers

Fiat 500 cant link remote start

0 votes
I cannot link the remote. The valet antena flashes when I plug it in the module, but the blue led doesnt react with ignition on. Nothing happens in any scenario while trying to program the remote. It starts fine with eom remote. Help!? Evo-one
asked Oct 30, 2020 in Fiat by Samuel Viens (160 points)

1 Answer

0 votes
press UNLOCK on the oem remote first since the remote starter will not allow remote programming will it is in an <Armed> state.


instead of looking at the antenna LED, take a look at the red led on the BACK of the module near the yellow loop wire.

1. ignition ON-OFF-ON (red led turns on)

2. Press and Brake 4 times (red led will flash on each brake press)

3. Both red led and antenna led should be flashing rapidly now.
answered Nov 2, 2020 by Robert T (284,390 points)
will try, thank you
OK so I get to the point where both red LED and antenna LED flashes, but then every scenario I do with the remote 441 wont program the remote....I press FONCTION then LOCK and ignition OFF, nothing happens