I have a 2006 Silverado 2500HD and am installing a Evo-All with Crimestopper SP502. Installation guide available for this setup is for Evo-All with remote start (for my vehicle). Guide also states to upload firmware 70.32. Using the Flashlink 4 to uploade firmware, I answered that I am installing external remote starter + alarm system. recommended firmware is 70.18, so this is what I installed into the Evo-All unit.
Please confirm that the firmware 70.18 is correct. Also, where can I find install schematic for Evo-All plus SP502?
My assumption is to connect Evo-All wiring per the Fortin Evo-All with remote start guide and install additional wiring from the SP502 per the SP502 guide offered by Crimestopper. If there is no guide offered by Fortin for the Evo-All plus SP502/remote start with alarm, please confirm the above assumptions. If I am off base, please guide me in the right direction.
Thanks in advance!