I am installing a EVO-All on a 2017 push to start Audi A3 with THAR-VW1 and R-Link. I follow all the steps during installation. The programming is successful and the DCrytor is able to create the bypass key. I plug everything back into the car, replace the R-Link with the TBVW, and attempt the 3x lock remote start. The cars lights turn on, and the hazards flash once. I hear the Audi chime inside the car and on the dashboard it says "Key not recognized". When I am sitting inside the vehicle, I click the 3x lock function and the car starts. It seems the remote start only works when I am sitting inside the car. To test this, I checked all the wires, connections, and redid the installation 3 times. Same result each time. The remote start only works when sitting inside the car. Once you step outside with the 3x lock function, the key is not recognized. Any ideas?