Quick Vehicle Finder
Find the right solution for your vehicle

Questions & Answers

EVO-ONE 3x Lock 2007 F150

0 votes
Will the EVO-ONE work with OEM Remote monitoring on a 2007 Ford F150 to use 3Xlock to start? I have noticed it in Guide # 34431 but is only mentioned in the troubleshooting guides not in the recomended guide #84131 listed on wirecolor.com. Can you please confirm which guide to use? Will the center pin of the shock sensor with option 38.3 enabled work as an external remote start trigger if guide #34431 will not work?

asked Nov 9, 2019 in FAQ by Grant Barberstock (190 points)

1 Answer

0 votes
there is no oem remote monitoring on the 2007 F150


if you absolutely want 3xlock...

You can flash version 0.82 in the remote starter instead of 1.24. DO NOT enable 38.3 with that firmware. The middle pin of the shock sensor will require 3x NEGATIVE pulses to start/stop the vehicle.
answered Nov 9, 2019 by Robb (234,130 points)
Works like a charm, with the exception of RAP shutdown, but customer would now like to add a Start2 and keep OEM 3x. Can i use an axxess trigger and set triged start under option 38 or is he out of luck - one or the other?
evo-start2?  just plug it in and program it.


only reason to use the axxess trigger with 38.3 is if you put in a shock sensor. Flash 1.24 back in there if that's the route you take.
A couple questions regarding options,

Yellow/Black to heated seat (w/relay) w/option 39 enabled and option 25 mode2 (.5 sec pulse)

Option 32 - Dk Blue  to FL doorpin (diode isolate??) RAP shutdown set to mode1 or 2

Option 32 - Dk Blue  to FL doorpin (diode isolate??) RAP shutdown set to mode1 or 2

32.3 for a pulse after shutdown .