Quick Vehicle Finder
Find the right solution for your vehicle

Questions & Answers

Dcyrptor not working, also cannot get pass step 3 programming

+1 vote
Error transmission failed check usb cable, cable has good connection, but it still gives me Receive ERROR after trying again

Also cannot get pass step 3 after blue light is on, then i turn the ignition to the on position, with no indication of rapid blue lights, please help!

Can bus is connected and good.
asked Sep 27, 2019 in Infiniti by Kevin Lay (390 points)

1 Answer

+1 vote
What is the service number to the module?
answered Sep 27, 2019 by derek ! (284,770 points)
S.N=002B04013259, previously one of the tech support manage to program it for me and it made it to step 5 with the rapid blue light indicator, but then it stop there. Not sure what to do at that point.
Once you get the blue led to flash you turn the ignition off and plug it into the flash link updater to perform the dcryptor process.
Ok, I tried 3 attemp to get the flashing blue led...it flashes, but when I turn off the ignition the red and yellow does not flash, so what maybe the issues here...so I skip that and actually try to dcrypt it and it still showing issue on the dcryptor page(Error transmission failed) receive error)
if you just turn the ignition off and try it then, does it work?
Meaning the flashing blue led...no
you say it doesn't work, how are you trying to remote start the vehicle once you get the blue led to flash and go out.
I am following all the steps? I am trying to get it to program into the car am I missing something here?
how are you trying to remote start the vehicle though? rf kit or OEM remote?
OEM, I am trying to get pass the Dcrpyting program procedure, havent gotten to the remote part just yet.

I have the Evo one(all in one) with a (thar nis2).

Forgot to mention its a manual transmission.
Do i need an RF KIT?

you need to first enable option C1 in the bypass setttings

and enable option 38.2 in the remote starter settings (not 38.4)

-----

if it's manual transmission you need to wire the clutch

----

you will most likely need an RF-KIT. 3xLock start is not listed on the website

https://fortin.ca/en/vehicles/infiniti/g35/2006-intelligent-key/

So even if i have the T-harness, i still need to tap into the wire in clutch? if so How can i do that?
What is the color to and from? also do i need a transmitter to go with the evo one for the remote start? which RF kit is compatible with the evo one all in one Manual transmission?

 S.N=002B04013259

Much Thanks!

So even if i have the T-harness, i still need to tap into the wire in clutch? if so How can i do that?
What is the color to and from? also do i need a transmitter to go with the evo one for the remote start? which RF kit is compatible with the evo one all in one Manual transmission?

 S.N=002B04013259

Much Thanks!

...