I recently purchased a smartstart module in hopes to add it to my prostart and EVO-ALL setup I currently have. I don't know what wires go where or if this is even possible as the data link cable seems to feed the prostart module and there is nowhere to plug in my smart start module. Sorry this is confusing I know. The wiring guide describes me plugging in two connectors to the prostart system and one four pin connector into the evoall which I can't seem to see where it goes and what all is involved. Any one help please. If I have it connected to my prostart module do I even need to connect it to. The Fortin bypass module as well?