EVO-ALL, THAR-VW1 Harness, TB-VW
Standalone installation with Key Bypass, Automatic, PTS . FIrmware 75.38, Hardware v6
During programming Blue light flashes rapidly indicating CAN bus activity when ignition is turned on.
Press and hold programming button, Blue LED turns off and Red LED turns on Solid. After 3 seconds release programming button, and red LED begins to flash 3x and then repeats continuously. Nothing happens, the LED’s do not rapidly alternate, even after waiting 20 mins or more. Step 7 never completes, unit does not program.
Wiring has been checked and rechecked. Any ideas why it doesn’t want to program?