I have installed the Evo-One along with a Crimestopper RFALL642W RF kit. I initially was having an issue where the OEM alarm would go off when I remote started the vehicle. I followed the guide and enabled option D 2 and connected the Purple and Purple/Wht wires along with the Orange Disarm wires.Everything is working as expected, the RF key fob will lock/ulock doors and ulocks/disarms the OEM alarm before start but it will not lock/arm after remote starting. I seen in another thread somone was having a similar issue and you said they could connect the Purple wire with 2 diodes to the LOCK and ARM wires at the same time. Can you please explain exactly how to wire them, where to put the diodes and what direction? And also why you would use them?