2006 Cdillac CTS base, standard key, EVO-One FW version 70.18, remote start v. 1.24. Wired & programmed per the diagram, 6-pin wires soldered to ignition switch wiring, using Fortin White wire as 2nd accessory. Module programmed per instructions- Program button held, power connector plugged in, Blue LED, plugged in remaining connectors (20-pin, valet, and antenna), key on, wait for Red LED, wait for Red LED flashing, start engine, hold for 3 seconds, Yellow LED, turn engine off.
Using Omega RF-51 remotes. They were programmed per instructions and can lock/unlock and pop trunk. Nothing happens when remote start function is tried.