Installed an EVO-ONE and REVO 1.1 on a 2015 Frontier. Had to lower the remote stater revision to 1.16 to get the revo unit programmed. I set function 6 (door locks) to mode 3 lock after remote start because doors were staying unlocked when it started. When I use the remote start I get an initial lock pulse and then a second one shortly after. I can not seem to stop the second lock pulse. I noticed today that there is a new t-harness guide for the frontier and it now shows tying the orange disarm wire in with the purple/white unlock wire. That wasn't on the previous guide.