I just installed an EVO-ONE and THAR-ONE-TOY1 into a 2013 Toyota Sienna G-Key per guide #19501. I programmed the module with the Flashlink 2 in bypass and remote start modes and selected the options that were required for the install per the guide (loaded the latest firmware update to 79.42 from 79.19). Once installed, the hookup procedure went as instructed with no issues. I confirmed function of all normal remote functions prior to remote starting. After i pressed lock 3x, there was no response at all from the vehicle. I ensured hood status, all wiring connections, and all doors closed before trying again, still no luck. I went through the troubleshooting guide for this particular issue twice with no resolve, so I may be at the point of requiring some technical help.