It is do able but would required quite a few parts:
1- Evo-One
2- Metra trigger
3- Flash link updater
4- RF kit (but only to enable a specific hidden option)
Essentially what you would do is using an RF kit enable option 38.3 in the evo-one, this will turn the center pin of the shock sensor port into a external trigger. This only works on a single pulse not 3 which is were the metra trigger comes in, it can convert 3 pulses (from your door lock wire) into a single output pulse. So essentially you would end up with a 3x lock.
So while it is not easy and will cost more it is do able.
Here is the guide you would want to follow to use the metra trigger with the evo-one/en/qa/?qa=blob&qa_blobid=8611491735551431219
OR
Just carry a second remote.